| ALATAS’ SERVICE | OFFSHORE |
| LOCATION | ASIA / SINGAPORE |
| EQUIPMENT | TELESCOPIC KNUCLE BOOM CRANE |
| BRAND | TOIMIL 40500, SWL6.75T |
BACKGROUND:
The Offshore Supply Vessel is equipped with a Telescopic Knuckle Boom Crane Toimil 40500, with a Safe Working Load (SWL) of 6.75 tons. After the recent transfer of the vessel to our Client, they requested an urgent refurbishment of the crane at our Alatas Workshop.
ALATAS SOLUTION:
At the owner’s request, we dispatched our service engineers to the vessel to remove the crane and transport it to our workshop for refurbishment. Upon arrival, our professional technicians immediately began dismantling the crane, replacing standard parts, performing necessary machining, sandblasting, painting, and reassembling it on an urgent basis.
JOB SCOPE AT ALATAS WORKSHOP:
- Dismantled the Telescopic Knuckle Boom Crane, including:
- Hoisting Winch
- Hook Block
- Control Block & Valves
- Two Hydraulic Cylinders (Horizontal Slewing Arrangement)
- Main Boom Cylinder
- Knuckle Boom Cylinder
- Four Tele-Section Hydraulic Cylinders
- Conducted Non-Destructive Testing (NDT) on all pins, the main base, and all boom sections; inspected and replaced pins and bushes as needed.
- Removed and installed all components for overhaul.
- Sandblasted and painted all crane parts with three coats of marine-grade paint (300 microns).
- Replaced all hydraulic hoses, pipes, fittings, and grease lines.
- Reassembled the complete crane.
- Fabricated a foundation to conduct a limited function test using an external Hydraulic Power Unit (HPU); performed Factory Acceptance Testing (FAT) with satisfactory results.
- Delivered the fully refurbished crane back to the customer.
Toimil Telescopic Folding Crane Overhaul Gallery










